F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
1
Release the clamp.
2
Disconnect the hose.
6. Remove the degas bottle hose from the radiator.
1
Release the hose clamp and slide it away from the end of the hose.
2
Slide the overflow hose off the radiator fitting.
7. Remove the fan blade assembly and fan clutch.
1
Use the fan pulley holding wrench to hold the water pump pulley steady.
2
Use the fan clutch nut wrench to remove the fan blade and the fan clutch.
8. Remove the fan shroud.
1
Remove the screws.
2
Lift and remove the fan shroud.
^
If equipped, disconnect the harness retaining pin-type retainer from the LH side of fan shroud.
9. Remove the fan blade and fan shroud out of the vehicle together.
