F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor
Panel/Defrost Door
VACUUM CONTROL MOTOR - PANEL/DEFROST DOOR
REMOVAL
1. Remove the panel/defrost door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the push nut.
3
Remove the screws.
4
Remove the panel/defrost door vacuum control motor.
INSTALLATION
1. To install, reverse the removal procedure.
Air Inlet Door
VACUUM CONTROL MOTOR - AIR INLET DOOR
REMOVAL
1. Remove the plenum chamber.
2. Remove the air inlet door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Remove the air inlet door vacuum control motor.
-
Rotate the vacuum control motor to disconnect the vacuum control motor rod from air inlet door lever.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door
VACUUM CONTROL MOTOR - PANEL/FLOOR DOOR
REMOVAL
1. Remove the floor duct.