F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
1
Remove the nut.
2
Remove the lever.
5. Remove the digital TR sensor bolts and the TR sensor.
Installation
1. Install the digital TR sensor and loosely install the bolts.
2. NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.