F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Seat Belt: Service and Repair
Removal and Installation
60/40 Split and Front Bench Seat, Center Passenger
SAFETY BELT - 60/40 SPLIT AND FRONT BENCH SEAT, CENTER PASSENGER
Torx Bit Tool Set
SPECIAL TOOL(S)
REMOVAL
1. Move the front passenger seat forward.
2. Using the special tool 501-D012 (D83L-2100-A), remove the bolts.
-
Feed the belt up through the seat cushion strap and remove the front passenger safety belt tongue assembly.
INSTALLATION
1. NOTE:
-
Make sure the tongue webbing is outside the seat side shield, not under the shield. The webbing could be cut if it is routed under the seat side
shield.
-
Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
To install, reverse the removal procedure.
2. Check the active restraint system for correct operation.
