F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Seat Belt Retractor: Service and Repair
Retractor - Rear, SuperCab
RETRACTOR - REAR, SUPERCAB
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL
1. Remove the upper rear corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the rear safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the rear safety belt retractor.
INSTALLATION
1. NOTE:
-
Make sure that safety belt webbing is not twisted prior to installation. The SuperCab rear retractor anchor should be positioned with the
vertical leg facing outboard.
-
Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
