F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
2
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the supplemental
restraint system (SRS) deactivation/reactivation procedure.
Deactivate the supplemental restraint system (SRS).
3
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the seat removal
and installation procedure.
Remove the seat on the side with the affected safety belt buckle and pretensioner.
60 percent seat
2. Remove the 60 percent seat cushion.
3. NOTE: Note the safety belt buckle pretensioner and usage detection switch wire harness routing for installation.
Remove the nut, the safety belt buckle and pretensioner and route the wire harness out from the seat.
Captains and 40 percent seat
4. NOTE: The driver side is shown, other seats are similar.
Remove the safety belt buckle pretensioner and usage detection switch electrical connectors from the seat cushion pan.
