F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor
CAMSHAFT POSITION (CMP) SENSOR
REMOVAL
1. Disconnect the battery ground cable.
2. Partially drain the cooling system.
3. Remove the air cleaner outlet tube.
4. Disconnect the engine harness from the water tube, remove the bolt and position the heater water outlet tube aside.
5. Disconnect the camshaft position (CMP) sensor electrical connector.
6. Remove the screws and the CMP sensor.
INSTALLATION
1. To install, reverse the removal procedure.