F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
4. Pull down evenly and remove the transmission fluid filter and seal.
5. Clean and inspect the transmission fluid pan, gasket and magnet.
Installation
1. CAUTION: If installing a new filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If transmission is being repaired for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
2. Position the pan magnet into the transmission fluid pan.
