F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Material
Material
Removal
All applications
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its
adaptive strategy. The customer needs to be notified that they may experience slightly different upshifts (either soft or firm) and this is a temporary
condition that will eventually return to normal operating condition.
Disconnect the battery ground cable.
3. Remove the transfer case.
All applications
4. Remove the driveshaft.
Material
5. Disconnect the Output Shaft Speed (OSS) sensor and remove the bolt for the fuel line bracket. Position aside the fuel line bracket.
6. Remove the transmission insulator to crossmember support nuts.
7. Install the high lift transmission Jack with the special tool to the transmission.