F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
14. NOTE: 4x2 shown, 4x4 similar.
Remove the extension housing and gasket.
1
Remove the nuts and bolts.
2
Remove the extension housing and gasket.
^
Allow fluid to drain into suitable container.
Installation
All vehicles
1. NOTE: 4x2 shown, 4x4 similar.
Install the extension housing and a new gasket.
1
Position the extension housing gasket and the extension housing.
2
Install the bolts and nuts.
2. Raise and position the transmission.
3. Position the exhaust hanger, the rear transmission insulator and install the bolts.
