F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
10. Remove the drive pinion collapsible spacer and discard it.
11. Using the special tool, remove the pinion bearing cone and roller assembly.
12. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Using a brass drift, remove the pinion bearing cups by tapping alternately on opposite sides of the cups.
Installation
Using 205-024
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1
After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2
Place the special tool on the outer pinion bearing cup.
3
Install the special tools.
