F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
Windshield: Vehicle Damage Warnings
CAUTION:
-
The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
-
After installing the urethane installed glass, the vehicle should not be driven until the urethane has cured. The curing times at
temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours (refer to Essex Drive Away Chart for cure times, as
temperatures and humidity vary). Inadequate curing of the urethane may adversely affect the strength of the urethane adhesive bond.
-
Care must be taken to avoid scratching the pinch weld.
-
Wipe off the Urethane Glass Prep immediately after each application because it flash dries.
-
Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
