F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
8. Position the lumbar adjuster control. Install the two mounting screws.
9. Install the seat adjuster control knobs, covers and the seat side trim panel screws.
1
Install the three seat side trim panel attachment screws.
2
Install the lumbar control knob.
3
Install the seat recliner handle and the handle screw.
10. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the front seat
removal and installation procedure.
Install the front seat.
11. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS) deactivation/reactivation procedure.
12. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
