F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
2. Install the brake drum.
3. If adjusting the rear brakes with the brake drums installed, refer to Brake Shoe Adjustment.
4. WARNING: Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the
wheel hub or brake drum that contacts the wheel. Installing wheels without correct metal to metal contact at the wheel mounting surfaces
can cause the wheel nuts to loosen and could allow the wheel to come off while the vehicle is in motion, causing loss of control.
Clean the wheel hub mounting surface.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
7. Remove the pin in the parking brake control and verify correct parking brake operation.
8. Check brake operation before driving.