ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Headlamp Bulb|Service Precautions|Page 9791 > < Headlamp Bulb|Service Precautions
Page 1
background image

Headlamp Bulb: Service and Repair

BULB - HEADLAMP

REMOVAL

WARNING:  The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped.
Handle the bulb only by its base. Avoid touching the glass envelope.

NOTE:

-

The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period
of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
on the headlamps with the bulb removed from the headlamp.

-

Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the correct holes and onto the ribs of the
reinforcement.

1. NOTE:  Make sure that the headlamp switch and the ignition switch are in the OFF position.

Remove the headlamp assembly.
1

Raise the headlamp retainers by pushing rearward and pulling up.

2

Disconnect the headlamp electrical connector.

3

Remove the headlamp assembly.

2. Rotate the headlamp bulb retainer counterclockwise and remove.

Headlamp Bulb|Service Precautions|Page 9791 > < Headlamp Bulb|Service Precautions