F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
4. On power driver seats, remove the driver side safety belt buckle.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Remove the driver seat safety belt buckle nut.
3
Remove the driver seat safety belt buckle.
INSTALLATION
NOTE: Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
Full Bench Seat
SAFETY BELT BUCKLE - FULL BENCH SEAT
