F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
10. NOTE:
-
The LH and RH head restraint rod guides are not interchangeable.
-
Install new units during installation. The LH and RH head restraint rod guides will be damaged during removal.
Install the head restraint rod guides.
11. Install the head restraint.
1
Insert the head restraint rods into the rod guides.
2
Press release button and push the head restraint rod past its stop position.
3
Using a flat-blade screwdriver, press the release tab on the second head restraint rod guide and push the head restraint rod into the rod guide.
12. Install the front seat backrest.
13. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the front seat
removal and installation procedure.
Install the front seat.
14. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS) deactivation/reactivation procedure.
15. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
16. Check the active restraints for correct operation.
