F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
15. Install the B-pillar weatherstripping.
Regular cab vehicles
16. NOTE: Make sure that after an automatic locking retraction (ALR) retractor is installed that the retractor is not in the ALR mode of operation
when installed.
Install the safety belt retractor and pretensioner.
1
Position the safety belt retractor pretensioner, aligning the tab into the sheet metal.
2
Install the bolt.
17. Remove the restraint system diagnostic tool from the passenger side safety belt retractor pretensioner electrical connector.
18. Connect the passenger side safety belt retractor pretensioner electrical connector.
19. Connect the battery ground cable.
