F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
Power Steering Pump: Service and Repair
Power Steering Pump
Power Steering Pump - 4.6L and 5.4L
Special Tools And Equipment
Special Tool(s)
Removal and Installation
1. Remove the power steering pump pulley.
2. Disconnect the power steering reservoir pump hose and pressure line from the power steering pump.
^
Drain the power steering oil reservoir.
3. Remove the three bolts and the pump.
4. To install, reverse the removal procedure.
^
Install a new power steering seal on the power steering pressure fitting by stretching the seal over the seal replacer until it is large enough to
slip over the threads of the fitting.
