F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
9. Remove the solenoid body assembly.
1
Remove the bolts.
2
Remove the nut.
3
Remove the solenoid body assembly.
10. Remove the solenoid screen assembly by rotating and pulling.
11. CAUTION: The steel Electronic Pressure Control (EPC) check ball is spring-loaded under the valve body separator plate.
NOTE: If the valve body separator plates are not to be serviced, proceed to installation procedure.
Remove the valve body separator plate reinforcement.
1
Remove the bolts.
2
Remove the separator plate reinforcement.
