F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
11. Tighten all the accumulator body, main control valve body, and solenoid body nuts and bolts. Tighten the bolts, working from the center to the
outside.
12. CAUTION: Make sure that the pump bore is clean and the old fluid filter seal has been removed. Damage to the new filter can occur.
Lubricate the new seal with clean automatic transmission fluid and install the new fluid filter and seal assembly.
13. NOTE: Do not discard the gasket unless damaged. This is a reusable gasket.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
Position the gasket onto the clean fluid pan. Make sure the magnet is positioned over the dimple in the fluid pan.
