F 150 Heritage 4WD Pickup V8-5.4L CNG VIN M (2004)
9. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Using a brass drift, remove the pinion bearing cups by tapping alternately on opposite sides of the cups.
Installation
Using 205-098
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1
After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2
Place the special tool on the outer pinion bearing cup.
3
Install the special tools.
2. Tighten the special tool to seat the pinion bearing cups into their bores.
Using 205-DO55 and 205-153