F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Door Lock Cylinder: Service and Repair
DOOR LOCK CYLINDER
REMOVAL
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the drivers door exterior handle.
2. Remove the door lock cylinder.
1
Remove the spring clip.
2
Remove the door lock cylinder.
INSTALLATION
1. NOTE: Make sure the lock release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
To install, reverse the removal procedure.