F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Keyless Entry Key-Pad: Service and Repair
General Procedures
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will
erase the stored customer code. The door locks will lock, then unlock, confirming the code is erased. The existing code will not need to be erased
to program new a code.
3. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is
programmed.