F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
2. CAUTION: Use care not to damage the instrument panel when removing the headlamp switch.
Using a small screwdriver, pry the headlamp switch from the instrument panel.
3. Disconnect the electrical connectors and remove the headlamp switch.
4. Remove the adjustable pedal switch.
1
Push the adjustable pedal switch out of the instrument panel far enough to access the electrical connector.
2
Disconnect the electrical connector and remove the adjustable pedal switch.
5. To install, reverse the removal procedure.
Brake Pedal Motor
Brake Pedal Motor
Removal and Installation
