F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
5. On 4x2 vehicles, measure the brake disc and hub thickness.
^
Install a new brake disc and hub if not within specification
6. On 4x4 vehicles, measure the brake disc. thickness
^
Install a new brake disc if not within, specification
7. If necessary, resurface the brake disc.
^
Ford recommends on-vehicle brake disc machining. Follow lathe manufacturer's instructions.
8. Inspect the disc brake caliper for leaks.
^
If leaks are found, disassembly is required.
9. Remove the disc brake anti-rattle clips.
1. Remove the pads.
2. Remove the disc brake anti-rattle clips.
Installation