F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
4. Remove metal shavings.
5. For vehicles with a two-piece brake disc and hub assembly:
1
Remove the brake disc from the hub.
2
Remove metal shavings from the hub, the brake disc mounting surfaces and from the ABS sensors.
3
Apply anti-seize lubricant to hub mounting surface to prevent corrosion.
4
Align the match marks and install the brake disc on the hub.
6. NOTE: It is not required to install new brake pads if friction material properties are within guidelines.
Install the brake caliper and brake caliper anchor bracket.