F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
2
Connect the heated PCV outlet hose.
3
Install the wiring harness routing clip retainer.
4
Connect the knock sensor electrical connector.
10. Install the fuel charging wiring harness bracket on the heater outlet tube mounting studs.
-
On 4.6L engine, tighten the nuts to 10 Nm (89 lb-in).
-
On 5.4L engine, tighten the nuts to 28 Nm (21 lb-ft).
11. NOTE: Battery removed for clarity.
Connect the 42-pin and 16-pin electrical connectors.
12. Connect the climate control vacuum connector.
13. Connect the eight fuel injector electrical connectors.