F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Deactivate the supplemental restraint system (SRS).
3
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the seat removal
and installation procedure.
Remove the seat on the side with the affected safety belt buckle and pretensioner.
60 percent seat
2. Remove the 60 percent seat cushion.
3. NOTE: Note the safety belt buckle pretensioner and usage detection switch wire harness routing for installation.
Remove the nut, the safety belt buckle and pretensioner and route the wire harness out from the seat.
Captains and 40 percent seat
4. NOTE: The driver side is shown, other seats are similar.
Remove the safety belt buckle pretensioner and usage detection switch electrical connectors from the seat cushion pan.
5. NOTE: Note the safety belt buckle pretensioner harness and usage detection switch wire harness routing for installation.
Remove the nut and the safety belt buckle and pretensioner.
INSTALLATION
