F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
3. CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed two times.
Install the power steering pump pulley.
^
Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, replace the pulley. If there is no paint or one paint
mark, use a paint pencil to mark the web area of the pulley near the hub.
^
Use the Power Steering Pump Pulley Replacer.
4. Connect the power steering pressure hose.
Vehicles with 4.2L and supercharged engines
5. Install the fan shroud.
All vehicles
6. Install the drive belt.
7. Fill and leak check the power steering system.
