F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Refill
8. After the torque converter has drained, install a new drain plug.
9. Install the torque converter drain plug cover.
10. Install the pan with gasket. Alternately tighten the bolts.
11. Lower the vehicle.
12. CAUTION: The use of any other fluids can result in incorrect operation of the transmission or transmission failure.
Fill the transmission.
^
Add 6.2 liters (6.5 quarts) of clean automatic transmission fluid to the transmission through the fluid filler tube.
13. Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.
14. With the engine running and the transmission at normal operating temperature 66 - 77°C (150 - 170°F), check and adjust the transmission fluid
level and check for any leaks. If fluid is needed, add fluid in increments of 0.24-liter (0.5-pint) until the correct level is achieved (fluid in the
cross-hatched area of the fluid level indicator).
