F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
3. Remove the rear driveshaft.
1
Remove the four bolts.
2
Remove the rear driveshaft.
4x4 vehicles
4. Remove the transfer case.
All vehicles
5. Use the high-lift Jack to support the transmission.
6. NOTE: RH shown, LH similar.
Remove the two bolts retaining the heat shield to the transmission support crossmember.
7. Loosen, but do not remove the transmission-to-crossmember nuts.
