F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
2. Install the ring gear bolts.
^
Apply stud and bearing mount to the ring gear bolts.
3. With the pinion depth set and the pinion installed, place the differential case in the rear axle housing.
4. Install a shim on the left side.
5. CAUTION: Mark the position of the bearing caps as arrows may not be visible. The bearing caps must be installed in their identical locations and
positions.
NOTE: Apply pressure toward the left side to make sure the left bearing cap is seated.
Install the left bearing cap, and loosely install the bearing cap bolts.
