F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
INSTALLATION
WARNING: To reduce the risk of serious injury, read and follow all warnings, cautions and notes at the beginning of the removal procedure.
1. Install the heated seat module in the mounting bracket. Verify that the locking tab is correctly seated.
2. Connect the heated seat module electrical connector.
3. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the front seat
removal and installation procedure.
Install the front seat.
4. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS) deactivation/reactivation procedure.
5. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
