F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
4. Install the hog rings.
5. Position the front seat cushion trim cover.
6. Fasten the front seat cushion trim cover J-clips.
7. Assemble the captains chair.
With Seat Integrated Restraints (SIR)
FRONT SEAT CUSHION - WITH SEAT INTEGRATED RESTRAINTS (SIR)
DISASSEMBLY
WARNING:
-
Always wear safety glasses when repairing a air bag supplemental restraint system (SRS) vehicle and when handling an airbag module.
This will reduce the risk of injury in the event of an accidental deployment.
-
After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterwards.
-
The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.
NOTE: 40 percent seat is shown, 60 percent seat is similar.
All vehicles
1. WARNING: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing
or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
