F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
2. CAUTION: Use care not to damage the instrument panel when removing the headlamp switch.
Using a small screwdriver, pry the headlamp switch from the instrument panel.
3. Disconnect the electrical connectors and remove the headlamp switch.
4. Remove the adjustable pedal switch.
1. Push the adjustable pedal switch out of the instrument panel far enough to access the electrical connector.
2. Disconnect the electrical connector and remove the adjustable pedal switch.
To install, reverse the removal procedure.
Brake Pedal Motor
Removal and Installation
1. Place the gearshift lever in first gear.
2. Disconnect the brake pedal motor electrical connector.