F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Parking Brake Cable: Service and Repair
Cable and Conduit - Front
Removal and Installation
1. NOTE: Make sure the parking brake control is fully released.
Relieve the tension on the parking brake system.
1. Pull the front parking brake cable down.
2. Insert a suitable retainer.
2. Disconnect the front parking brake cable and conduit from the RH parking brake rear cable and conduit.
^
Pull the front parking brake cable and conduit rearward to unclip it from the RH parking brake rear cable and conduit.
3. Remove the front door scuff plate.
