ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cable and Conduit - Front|Page 6075 > < Cable and Conduit - Front
Page 2
background image

4. Remove the cowl side trim panel.

5. Disconnect the front parking brake cable and conduit. 

1. Compress the connector to release the front parking brake cable. 
2. Disconnect the front parking brake cable. 
3. Remove the front parking brake cable.

6. Remove the front parking brake cable and conduit. 

1. Pry the rubber seal from the front floor pan. 
2. Unclip the front parking brake cable and conduit from the front parking brake cable clip.
3. Compress the retainer and release the front parking brake cable and conduit from the bracket.
4. Remove the front parking brake cable and conduit.

7. To install, reverse the removal procedure.

Cable and Conduit - Front|Page 6075 > < Cable and Conduit - Front