F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Romeo engine (4.6L)
10. Install the exhaust manifold to EGR valve tube.
-
Install the differential pressure feedback EGR system and connect the electrical connector.
-
Tighten both fittings starting at the top in two stages.
-
Stage 1: Hand-tighten.
-
Stage 2: Tighten to 35 - 45 Nm (26 - 33 ft. lbs.).
Windsor engine (5.4L)
11. Install the exhaust manifold to EGR valve tube.
-
Tighten both fittings starting at the top in two stages.
-
Stage 1: Hand-tighten.
-
Stage 2: Tighten to 40 - 60 Nm (30 - 44 ft. lbs.).
-
Connect the two differential pressure feedback EGR system hoses.