F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
5. Install the timing chain guide.
1
Position LH timing chain guide.
2
Install and tighten the bolts.
3
Position the RH timing chain guide.
4
Install and tighten the RH bolts.
6. CAUTION: Unless otherwise instructed, do not rotate either the crankshaft or the camshafts, when the timing chains are removed and the
cylinder heads are installed. Severe piston and valve damage will occur.
NOTE: The number one cylinder is at Top Dead Center (TDC) when the stud on the engine block fits into the slot in the handle of the special
tool.
Using the special tool, position the crankshaft so the number one cylinder is at TDC.
7. Remove the Crankshaft Holding Tool.
8. Position the LH (inner) timing chain on the crankshaft sprocket, aligning the copper (marked) link with the timing mark on the sprocket.
