F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
3. Tighten the nuts in the sequence shown.
4. Install the three-way catalytic converter to exhaust manifold nuts.
Romeo engine (4.6L)
5. Install the exhaust manifold to EGR valve tube.
-
Install the differential pressure feedback EGR system and connect the electrical connector.
-
Tighten both fittings, starting at the top, in two stages.
-
Stage 1: Hand-tighten.
-
Stage 2: Tighten to 35 - 45 Nm (26 - 33 ft. lbs.).
