ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Bleeding - System|Page 2449 > < Bleeding - System|Page 2447
Page 4
background image

4. Tighten the RH rear bleeder screw and disconnect the waste line.

5. Repeat Steps 2, 3 and 4 for the LH rear bleeder screw, the RH front disc brake caliper bleeder screw, and the LH front disc brake caliper bleeder

screw, in that order.

6. Connect the scan tool DCL cable adapter into the vehicle data link connector (DLC) under the dash and follow the scan tool instructions.
7. Repeat the system bleed procedure as outlined in Steps 1 through 5.

Caliper

WARNING:  Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the
brakes inoperative.

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink

Bleeding - System|Page 2449 > < Bleeding - System|Page 2447