F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Open the engine air cleaner.
^
Disconnect the Mass Air Flow (MAF) sensor electrical connector from the wiring harness.
^
Release the air cleaner clamp.
^
Separate the inlet side of the air cleaner from the outlet side of the air cleaner.
CAUTION: Do not tamper with the sensing elements located in the mass air flow (MAF) sensor. Tampering may result in unit failure.
3. Cut the tape on the wire loom of the extension harness.
^
Peel back the wire loom from the extension harness near the grommet in the air cleaner.
CAUTION: Do not cut the MAF sensor wires when cutting the tape on the wire loom.
4. Remove the grommet from the outlet side of the air cleaner and slide the grommet down the extension harness.
