ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - Reprogram PCM for Cold Start Problem|Page 4971 > < Campaign - Reprogram PCM for Cold Start Problem|Page 4969
Page 3
background image

AFFECTED VEHICLES:
CERTAIN 2003 F-150 MODELS EQUIPPED WITH A 4.6L ENGINE

SERVICE PROCEDURE

1.

Using WDS or equivalent, reprogram the powertrain control module (PCM) to the latest calibration listed in the table.

NOTE:

If the PCM is already programmed to the latest level calibration per the chart, reprogramming is not necessary.

2.

Obtain and prepare an Authorized Modification Label. Write the modification completed, your P&A code, date of repair and the program type and
number as shown in Figure 1.

Campaign - Reprogram PCM for Cold Start Problem|Page 4971 > < Campaign - Reprogram PCM for Cold Start Problem|Page 4969