F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Throttle Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the bolts and the accelerator control splash shield.
3. Disconnect the engine breather hose and the Idle Air Control (IAC) valve hose, and position aside.
NOTE: 5.4L shown, 4.6L similar.
4. Disconnect the Throttle Position (TP) sensor electrical connector.
5. Remove the bolts and the sensor.
INSTALLATION
1. To install, reverse the removal procedure.
