F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
11. If necessary, remove the Output Shaft Speed (OSS) sensor.
1
Remove the bolt.
2
Remove the OSS.
Installation
1. CAUTION: Use care not to induce contamination in the form of dirt or foreign material when installing either of the sensors.
If removed, install the OSS.
1
Lubricate the O-ring and install the OSS.
2
Install the bolt.
2. Position the Heated Oxygen Sensor (H02S) connector back in place.
3. If removed, install the TSS.
1
Lubricate the O-ring and install the TSS.
2
Install the bolt.
