F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
2. Remove the safety belt buckle assembly.
1
Using the special tool 501-010 (T77L-2100-A) remove the bolt.
2
Remove the safety belt buckle assembly.
3. Remove the safety belt and buckle assembly.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt and buckle assembly.
INSTALLATION
1. To install, reverse the removal procedure.
^
Route the rear center safety belt and tongue through the safety belt retaining strap on the rear seat back.
^
See the removal procedure or Specifications for torque specifications.
NOTE:
^
The double safety belt buckle assembly or safety belt and buckle assembly must be installed on top of the rear seat riser.
^
Make sure that the belt webbing is not twisted prior to installation.
^
Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
^
Make sure to tighten bolts to specification.
2. Check the restraints system for correct operation.
