F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
Seat Belt Retractor: Service and Repair
Rear Retractor, SuperCab
SPECIAL TOOL(S)
REMOVAL
1. Remove the upper rear corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the rear safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the rear safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure that safety belt webbing is not twisted prior to installation. The SuperCab rear retractor anchor should be positioned with the
vertical leg facing outboard.
^
Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.
2. Check the restraint system for correct operation.