F 150 Super Crew 2WD V8-4.6L SOHC VIN 6 (2003)
^
PLEASE REFER TO THE APPROPRIATE COMPONENT OR SYSTEM TO DETERMINE LOCATION OF THE FRONT AIR BAG
SENSORS.
^
THE SIDE AIR BAG SENSORS ARE LOCATED AT OR NEAR THE BASE OF THE B-PILLAR.
^
TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT AT LEAST
ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF EQUIPPED).
8. Install the web guide.
9. Route the safety belt through the B-pillar trim panel.
^
Install the B-pillar trim panel insert.
NOTE: Position the D-ring to its highest point.
10. Twist the safety belt and route the safety belt anchor through the B-pillar trim panel at the bottom.
11. Using the special tool, install the safety belt anchor.
