ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Procedures|Page 6201 > < General Procedures
Page 1
background image

Battery: Service and Repair
Removal and Installation

Battery

REMOVAL

1. Disconnect the battery cables.

2. Remove the battery heat shield.

3. Remove the battery hold-down bolt and the battery hold-down clamp.

4. Remove the battery.

WARNING:  WHEN LIFTING A BATTERY, EXCESSIVE PRESSURE ON THE END WALLS COULD CAUSE ACID TO LEAK
OUT THROUGH THE VENT CAPS, RESULTING IN PERSONAL INJURY, DAMAGE TO THE VEHICLE OR BATTERY. LIFT
WITH BATTERY CARRIER.

INSTALLATION

1. To install, reverse the removal procedure.

Battery Tray

REMOVAL

1. Remove the battery.

General Procedures|Page 6201 > < General Procedures